The signal was weak, barely a whisper above the static of the Badlands, but Kael knew the rhythm. It was the heartbeat of a Class-4 Industrial Fabricator, better known in the salvage trade as a "Generator."
Above the file name, a system notification blinked:
Always print gears flat on the build plate. Do not print gears standing on their edge. The lateral strength of layer adhesion is weak; teeth need the perimeter lines to run continuously around the axis.
If you are building or looking for a gear generator that outputs STL files for 3D printing, ⚙️ Core Geometric Parameters
This is where most printed gears fail. In theory, gear teeth should touch at the pitch line. In reality, FDM (Fused Deposition Modeling) printers have a tolerance of roughly ±0.1mm to ±0.2mm.