24SepSeptember 24, 2021

Tower Crane — Dismantling Method Statement

A Tower Crane Dismantling Method Statement is a critical safety document that outlines the step-by-step process, equipment requirements, and risk mitigation strategies for removing a crane from a construction site 1. Preliminary Preparations

2. Scope of works

  • Safe planning, rigging, step-by-step dismantling, transportation and storage of the tower crane and associated components; removal of foundations/bolts if requested; reinstatement of area.
  • Mobile crane (capacity typically 50–200 tons, depending on tower crane size) – for final jib and mast removal.
  • Suitable rigging gear (spreader bars, shackles, slings of correct SWL – Safe Working Load).
  • Hand tools (torque wrenches, sledgehammers, pin punches, hydraulic jacks).
  • Climbing frame or auxiliary crane (in some internal climbing dismantles).
  • Personal Protective Equipment (PPE): Full body harness with double lanyard, hard hat, steel-toe boots, high-vis vest, gloves, and eye protection.
  • Communication system: Two-way radios with backup batteries.

Hook & Hoist: Remove the hook block and reeve the hoist rope back onto the drum. tower crane dismantling method statement

  1. Hard Hat and Safety Vest: All personnel involved in the dismantling process will wear hard hats and safety vests.
  2. Fall Protection: Fall protection equipment, such as harnesses and lanyards, will be used to prevent falls from heights.
  3. Load Control: Loads will be properly secured and controlled during lifting operations.
  4. Fire Extinguisher: A fire extinguisher will be readily available on site.

Key constraint: The mobile crane’s jib must reach the top of the tower crane without exceeding 75% of its rated capacity—a legal margin in most jurisdictions. A Tower Crane Dismantling Method Statement is a

Slinger/Signallers: Responsible for attaching loads and directing the assist crane. Mobile crane (capacity typically 50–200 tons, depending on

by