Sp Flash Tool — Stuck At [top] Download Da 100

When the SP Flash Tool gets stuck at "Download DA 100%" it typically means the "Download Agent" (DA) has been successfully transferred to the device, but the tool is failing to initiate the actual flashing process

6. Advanced Steps

• Use a Different Version of SP Flash Tool: Try using an older or newer version of the SP Flash Tool. Sometimes, compatibility issues arise with certain device models.

The device isn't in the correct boot state (BROM mode) to accept the next phase of flashing. Cable/Port Issues: sp flash tool stuck at download da 100

When the SP Flash Tool is stuck at "Download DA 100%" (often accompanied by a purple progress bar), it typically indicates a communication failure between the software and your device's Boot ROM. This stage is when the Download Agent (DA) is being sent to the phone's internal SRAM to prepare it for flashing. Common Fixes for DA 100% Freeze When the SP Flash Tool gets stuck at

Driver Conflicts: Outdated or multiple conflicting VCOM/Preloader drivers can stall the process. Use a Different Version of SP Flash Tool

1. Driver Conflicts (Most Common)

Windows may be using the wrong driver for your device. The correct driver is MediaTek USB Port (or MTK USB Com Port). If Windows uses libusb or a generic MTP driver, the handshake fails.

. A common fix is to uninstall existing drivers and use an auto-installer to ensure they are properly recognized by Windows. Battery and Connection Method Completely the device.

Attempt the connection while holding down the Volume Up, Volume Down, or both buttons to force the correct boot mode.