Resetter Printer Canon G2010 //free\\ <GENUINE × 2024>

The Ultimate Guide to the Resetter Printer Canon G2010: Why, When, and How to Reset Your MegaTank

If you own a Canon PIXMA G2010, you’ve invested in one of the most popular “MegaTank” inkjet printers on the market. Known for its low-cost refillable ink tanks and high page yield, the G2010 is a workhorse for home offices and small businesses. However, like all printers in this series, it has a hidden obstacle: waste ink pad counter.

| Problem | Solution | | :--- | :--- | | "Printer not found" | Your PC drivers are corrupted. Reinstall Canon G2010 drivers. Ensure you are using a USB 2.0 port (not USB 3.0). | | Service mode fails (no flashing lights) | You are too slow. Practice the button sequence. Watch a YouTube video for timing. | | Counter resets but errors return after 10 pages | The EEPROM is failing. Use a different resetter tool. Or the physical pad is causing a false reading. | | Free tool shows "Unknown error 200" | Your printer firmware is too new for the free tool. Pay for WICReset for updated support. | | Printer shows "5B01" even after reset | You only reset the main counter. Look for a "Platen" or "Ink Absorber 2" counter in your tool. | resetter printer canon g2010

Release both buttons. The green power light will flash and then stay steady. Reset the Waste Ink Counter Once in Service Mode (steady green light), press the to confirm the command. The Ultimate Guide to the Resetter Printer Canon

The printer will process the reset and may print a page showing a "D" value of , indicating the counter is cleared. Exit Service Mode button to turn the printer off. Turn the printer back on; the error should be gone. Factory Reset (Device Settings) Use this for general connection or configuration issues. LCD Button Method Ensure the printer is on. Need it: Printer shows a clear “waste ink”

How to Reset Canon G2010 Printer: The Ultimate Guide to Fix Error 5B00

Is your Canon PIXMA G2010 printer suddenly stopping in the middle of a job? Are you seeing a dreaded "Error 5B00" message on your computer screen, or are the Power and Alarm lights blinking alternately?

• Need it: Printer shows a clear “waste ink” or “service required” message but otherwise prints and scans fine; no visible leakage; you’re comfortable doing light maintenance.
• Don’t use it: You see wet ink under the printer, printing defects from clogged heads after many months, or the printer is still under warranty and you prefer official service.

Wait for the lights to stop flashing, then turn the printer OFF and back ON again to complete the process.  Verifying the Reset (EEPROM Data)