Set Hx Prc 6020 Technical Data Install | Radio

Introduction

Uses a specific power input pin (Mtrl-Brass) and battery box lock mechanism (Mtrl-Aluminum) for secure attachment. radio set hx prc 6020 technical data install

Here is a checklist of items to be verified during the installation of the PRC 6020 radio set: Introduction Uses a specific power input pin (Mtrl-Brass)

1. Radio Unit: The radio unit is a compact, ruggedized device that can be carried by a single person. It is usually mounted on a belt or a harness.
2. Antenna: The whip antenna is attached to the radio unit and extended to its full length for optimal performance.
3. Power Source: The radio set is powered by a battery pack, which typically consists of 6 or 12 nickel-cadmium (Ni-Cd) batteries.
4. Headset or Speaker: A headset or speaker is connected to the radio unit for audio communication.

• Run a 10 AWG red wire from the vehicle battery positive (not the fuse box).
• Run a 10 AWG black wire to chassis ground (< 0.5Ω resistance).
• Crimp ring terminals onto the VPA’s DC input studs (M6 size).

1. Select a location in the vehicle that allows easy operator access and does not interfere with vehicle controls.
2. Secure the mounting bracket to the vehicle structure using Grade 8 bolts (min 10mm diameter).
3. Ensure the mounting surface can support 5kg of static load (radio weight plus operational stress).

B. Vehicle Installation (Vehicular Adapter Kit – VAK6020)

Components:

• Transmitter