Miele 3717 — Fix

Fixing the Miele 3717: A Step-by-Step Guide

Water Intake Faults (F1/F2): Usually due to a clogged inlet filter or a faulty inlet solenoid valve. Check the small filter screen where the hose connects to the tap for debris. miele 3717 fix

1. Step 1: Clean the 6-pin connector with DeoxIT. (10% success)
2. Step 2: Reset the handle by holding the canister pedal and pressing Max. (5% success)
3. Step 3: Wiggle the hose 12 inches from the handle. Does the error blink? Yes → Replace the hose ($40 third-party). No → Go to Step 4.
4. Step 4: Remove the wand. Plug the hose directly into the canister. Does error stop? Yes → Replace the telescopic wand. No → Go to Step 5.
5. Step 5: Open the canister. Check capacitor C39. Bulging? Replace ($1). Flat? Check the pedal ribbon connector.
6. Step 6: If all else fails, perform the "Resistor bypass" (loses variable speed) or take the board to an electronics repair shop with this article.

Open Network Ports: Ensure your router's firewall is not blocking the necessary ports. Miele appliances require ports 80, 443, 53, and 5353 to be open for communication. Fixing the Miele 3717: A Step-by-Step Guide Water

Common Issues with Miele 3717

Follow these steps in order to resolve the connectivity issue: Step 1: Clean the 6-pin connector with DeoxIT