The Icom CS-F3161/F5061 programming software (also referred to as CS-F3160/F5060) is the essential tool for configuring and managing Icom's line of professional analog and digital land mobile radios. This software enables technicians and operators to customize channel frequencies, signaling codes, and advanced features such as GPS and emergency alerts. Official Procurement and Downloads
Click OK.
Repeat for more channels.
Click Write (PC → Radio). Wait 10 seconds. Do not disconnect the cable.
Cycle power on the radio. Test by keying up (with proper license).
5. System & Options
- Power level (High/Low)
- Time-out timer (TOT) in seconds/minutes
- Busy channel lockout (BCLO)
- Lone worker mode enable/disable
2. Via Radio Forums and Archives
Many radio enthusiasts and volunteer fire departments archive these files for legacy support.
Download the Software: Click on the software link to initiate the download. Depending on your browser settings, you may be prompted to select a download location or confirm that you want to download the file.
Select Your Product: Within the support section, find and select the product category that matches your radio model (in this case, the F3161 or F5061).
Part 7: Common Problems and Solutions
| Problem | Likely Cause | Fix |
|---------|--------------|-----|
| Software crashes on launch | Missing Visual C++ Redistributable | Install VC++ 2005-2019 packages |
| Cannot select COM port 3 | Port is in use by another app | Close GPS software, serial terminals |
| Verify fails on write | Radio battery low or cable unsteady | Fully charge battery, hold cable firmly |
| "Unsupported firmware version" | Radio firmware newer than software | Update CS-F3161 to latest version (v3.5+) |
| Buttons don’t do anything | Key assignment is "Unassigned" | In software, go to Key & Display → assign P0/P1/P2 |
For professionals managing public safety fleets or enthusiasts diving into the NXDN world, the CS-F3161/F5061
Bible: Browse OT/NT Books