Firmware Reset Samsung M2020w ^new^ Free Now
Blog Post: How to Factory Reset a Samsung Xpress M2020W (Free & Easy)
Posted by TechFix Admin | 5 min read
If your Samsung Xpress M2020W laser printer is displaying persistent error lights, refusing to connect to Wi-Fi, or showing "Incompatible Toner" messages after a refill, a firmware reset is often the best solution. While many online services charge for "fix" files, you can perform a standard factory reset and firmware update for free using official tools. firmware reset samsung m2020w free
- Press the WPS button on your WiFi router (not the printer yet).
- Within 2 minutes, press and hold the WPS button on the printer for 2 seconds.
- The green WPS LED on the printer will blink, then stay solid. Connection done.
Troubleshooting the Reset
| Symptom | Solution | | :--- | :--- | | Holding buttons does nothing | Printer is in “Power Save” mode. Unplug for 30 seconds, then try Method 1 again. | | Printer prints blank page after reset | Normal – that’s the config report with no data. | | “Replace Toner” still shows | Firmware reset doesn’t affect toner chip. You need a new cartridge or a chip resetter (sold separately). | | Printer won’t turn on after reset | Unplug power cord for 1 minute. Plug back in. | Blog Post: How to Factory Reset a Samsung
Q2: My M2020W is stuck in “Demo” mode. Will this reset fix that?
A: Yes. Demo mode is a firmware configuration. The button reset restores standard user mode. Press the WPS button on your WiFi router
Step 2: Press and hold the WPS button for 5 seconds until the LED blinks .
