rozwińzwiń
Najnowsze artykuły
Popularne wyszukiwania
Polecamy

Program [repack] — Epson L4150 L4160 L4170 Resetter Adjustment

Epson L4150 , L4160, and L4170 Resetter Adjustment Program: A Complete Guide

  1. Physical Inspection: Open the printer and inspect the waste ink pad. If it is saturated (sponges are hard and dripping), it must be replaced or cleaned.
  2. Source Verification: Only obtain the program from trusted, community-verified sources (e.g., specialized printer repair forums). Scan with multiple antivirus engines.
  3. Firmware Version Check: Ensure the resetter version matches the printer’s firmware (e.g., v1.0.x vs. v2.0.x).
  4. Offline Operation: Disconnect the printer from the internet during the reset to prevent automatic Epson firmware updates that might re-lock the counter.
  5. Post-Reset Cleaning: Run 2-3 head cleaning cycles and print a nozzle check pattern.
  • Click “Particular adjustment mode” (or similar), then select “Waste ink pad counter” or “Ink Pads” (may appear as “Waste ink counter” / “Counter reset”).
  • Click “Check” (to read current counters) — note values.
  • Click “Initialize” or “Reset” to clear the waste-ink counter. Wait until the process finishes.
  • Power off the printer, wait 10–20 seconds, then power it back on. Print a nozzle check or test page.

    • Epson L4150 / L4160 / L4170 — Waste Ink Counter Reset Guide

    Warning: Resetting the waste-ink counter may bypass the printer’s intended end-of-life safeguard. Only proceed if you understand the risks and have cleaned or replaced waste-ink pads/tanks as needed. Epson L4150 L4160 L4170 Resetter Adjustment Program

    Print Head ID Setting: Allows for writing a new ID if the print head is replaced. Epson L4150 , L4160, and L4170 Resetter Adjustment

    However, it is not a permanent fix. If you use the adjustment program, you must pair it with the physical maintenance of the printer. Physical Inspection: Open the printer and inspect the