top of page

E07-m1101d Pinout

Unlocking the Secrets of the E07-M1101D Pinout: A Comprehensive Guide

Operates in the 433MHz ISM band (range: 300–348 MHz, 387–464MHz, and 779–928MHz). Transmission Power: e07-m1101d pinout

This guide applies to the e07-m1101d as sold by EByte and compatible manufacturers. Always confirm with your batch’s datasheet. Unlocking the Secrets of the E07-M1101D Pinout: A

A decoupling capacitor (e.g., 10µF to 100µF) placed close to the VCC and GND pins is highly recommended to handle current spikes during transmission. E07-M1101D-TH User Manual - Ebyte Assuming voltage compatibility: confirm whether TX/RX are 3

MOSI: Connect to the hardware SPI MOSI (D11 on Arduino Uno).

Common pitfalls

  • Assuming voltage compatibility: confirm whether TX/RX are 3.3V or 5V.
  • Miswiring TX/RX (should be crossed).
  • Not sharing grounds.
  • Expecting all handshake lines to be present—many modules omit them.
  • Relying on silkscreen alone for pin function—consult datasheet or continuity-check pins.

Conclusion

According to the manifest pinned to the wall, this was the "Geiger-Muller Interface Module." But the manifest was vague, and Elara needed to wire a modern data logger to the thing before the grant review on Friday.

bottom of page