The static hissed, a sharp, cold sound that filled the small cabin. Elias flipped through the yellowed pages of the DXAR8108 Radio User Manual
Power On: Slide the power switch (usually on the side) or press and hold the Power button.
This usually indicates a low battery. Place the unit in the charger. Heavy Static Change to a different channel to avoid local interference. Maintenance Tips dxar8108 radio user manual portable
Push-to-Talk (PTT) Button: Large, textured button on the left side.
Hands-free operation for hiking or driving. The static hissed, a sharp, cold sound that
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
| Problem | Solution |
| :--- | :--- |
| Radio does not turn on | 1. Check if batteries are dead.
2. Check if AC cord is plugged in properly.
3. Clean battery contacts with a pencil eraser if they look rusty. |
| Weak Reception (FM/SW) | 1. Fully extend the telescopic antenna.
2. Try moving near a window.
3. Rotate the antenna direction. |
| Weak Reception (AM) | Rotate the entire radio unit. The internal ferrite bar picks up signals directionally. |
| Static or Noise | 1. You may be near electrical interference (computers, LED lights). Move the radio.
2. Check the Tuning knob to ensure you are centered on the station. |
| Sound is distorted | 1. Lower the volume.
2. Adjust the Tone knob.
3. Batteries may be weak (volume drops or distorts at high levels). | Place the unit in the charger
Unlike older radios requiring a docking station, the DXAR8108 supports USB charging: