Download _hot_ Software Firstcom Fc 136 | 2026 Edition |

Firstcom FC-136 is a handheld VHF transceiver typically used for radio communications. Because it does not allow for manual frequency setting on the device itself, it requires specific programming software and a data cable to manage its channels and settings. Key Specifications & Requirements Frequency Range: Operates in the VHF band between 136–174MHz Programming Method: Frequencies cannot be set manually

Also, note that the above content is a sample and you should verify the information with the actual device and software documentation. download software firstcom fc 136

Includes Tone Squelch (CTCSS/DCS) and VOX for hands-free operation. Where to Find Downloads Firstcom FC-136 is a handheld VHF transceiver typically

Customize Frequency Steps: Ensure your radio aligns with local regulations and frequency plans. Programming Hardware Requirements In addition to the software, you will need: Cable Issues: The software is useless without a

• Cable Issues: The software is useless without a USB programming cable. The software does not auto-detect the COM port well. You often have to manually go into the settings and select the COM port assigned to your cable.
• Driver Hell: If you are using a cheap generic programming cable, you may run into the "Prolific Driver" issue, where the cable uses a counterfeit chip. You may need to install an older version of the Prolific driver to get the computer to talk to the radio.

• Device specifications (ports, protocol: SIP/H.323, capacity).
• Software prerequisites (Windows XP/7/10, TFTP server, serial console cable).
• Step-by-step download procedure:

  Backup Data: Before writing new settings, always "Read" the current configuration from your radio and save it as a backup file. Firstcom FC-136 Manual and Specs | PDF - Scribd