Bts 350 User Manual _verified_: Biosystems

automatically performs a self-test to check optical and internal systems The Main Menu

1. Work Area: The work area is the heart of the cabinet, where users perform tasks such as handling biological agents, preparing samples, and conducting experiments.
2. Airflow System: The airflow system consists of a blower, HEPA filters, and a network of ducts that provide a laminar flow of air across the work area.
3. HEPA-Filtered Exhaust System: The exhaust system features a HEPA filter that captures 99.97% of airborne particles, ensuring that hazardous biological agents are not released into the environment.
4. Control Panel: The control panel allows users to adjust settings, monitor performance, and receive alerts.

Daily: Perform a wash cycle with distilled water at the beginning and end of each shift to prevent protein buildup in the flow cell. biosystems bts 350 user manual

Reading the Display

The display will show four simultaneous values. automatically performs a self-test to check optical and

Data Management: The manual explains how to utilize the internal printer and RS-232 port for LIS integration. Work Area : The work area is the

• Turn off the gas. Remove the cup.
• The unit will save the settings and return to normal monitoring mode.

Calibration: Always run a fresh standard or calibrator when switching reagent lots. 4. Routine Maintenance (The "Golden Rules")

The Calibration Process (Step-by-Step)

1. Find Fresh Air: Turn the unit on in a clean, fresh air environment. Let it run for 2 minutes.
2. Enter Calibration Mode:
   • Clean optical surfaces per instructions.
   • Check tubing and fittings for leaks.
   • Verify software backups and result export functions.