Abro Spray Paint Material Safety Data Sheet -

The ABRO Spray Paint Material Safety Data Sheet (MSDS/SDS) classifies the product as an extremely flammable aerosol that contains hazardous chemicals like propane, butane, acetone, and toluene. It is critical to use this product in well-ventilated areas and wear personal protective equipment (PPE) such as safety goggles and gloves. Hazard Identification

Flush with large amounts of water for at least 15 minutes; seek medical attention. abro spray paint material safety data sheet

2. HAZARDS IDENTIFICATION

GHS Classification (Globally Harmonized System): The ABRO Spray Paint Material Safety Data Sheet

Ingestion (Unlikely but possible)

• Action: Do NOT induce vomiting (aspiration risk – product can enter lungs causing chemical pneumonia). Rinse mouth, give 2-4 oz water if conscious, and seek immediate emergency care.

• Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
• Do not spray on an open flame or other ignition source.
• Do not puncture or incinerate container.
• Use only outdoors or in a well-ventilated area.
• Wear protective gloves and eye protection.

• Signal Word: DANGER
• Hazard Statements:

  16. OTHER INFORMATION

  Revision Date: [Current Date]
  Disclaimer: The information provided is believed to be accurate but is not exhaustive. ABRO Industries assumes no liability for use or reliance upon this data. Users should verify suitability for their specific applications. This document is intended for industrial/commercial use only. Action: Do NOT induce vomiting (aspiration risk –

  7. Handling and Storage

  • Handling: Use only in well-ventilated areas. No smoking, sparks, open flame. Ground container when transferring. Avoid breathing vapors.
  • Storage: Keep in cool, dry, well-ventilated area <50°C (120°F). Store away from oxidizers, acids, heat sources. Do not pierce or incinerate cans.
  • Incompatibilities: Strong oxidizers, chlorine, heat, open flame.